Rhino 2400 - Textured, Chemical Resistant System

Rhino 2400 is a premium quality textured coating system. It contains no solvents (100% solids, zero VOC) or carcinogens and has minimal odor to assure low toxicity and ease of application. Rhino 2400 has a unique texture quality (orange peel effect) that makes an aesthetically pleasing effect. The viscosity is well suited for vertical applications. This system also has excellent chemical, abrasion, and impact resistance. Rhino 2400 is typically stocked in 8 standard industrial colors.


  • Floor Coatings
  • Secondary Containment Coating
  • Tank Lining


Floor Coatings

Rhino® 2400 is an excellent bonding, medium viscosity, chemically resistant protective floor coating. It is a thixotropic, moisture insensitive coating, which holds a “texture” when applied at up to 10 mils using an 1/8” nap roller. It will not crater or blush, and dries to a high gloss. Rhino® 2400 will protect concrete in areas were high concentrations of chemicals are used. Rhino® polyethylene beads or other non-skid material may be broadcast into Rhino® 2400 to achieve a non-slip surface.

Secondary Containment Coating

Rhino® 2400 is perfectly suited for use as a chemically resistant containment coating. Application of 2400 is ideal for chemical tanks, chemical disposal pits or tunnels, as well as areas of high chemical concentration. First apply a coat of Rhino® 1500 series primer to surface at a rate of 5 – 7 mils (200 – 250 sq. ft. per gallon). Then apply Rhino® 2400 at a rate of 15 – 20 mils (80 – 100 sq. ft. per gallon) until desired thickness is reached. Apply successive coats after the previous coat has tacked but before fully cured. Material should be allowed a cure time of 48 hours minimum before exposure to any chemicals (product will continue to cure for 7 days to full properties).


  • Icon of a document.

    Rhino 2400 Data Sheet