DuraTite 1395

DuraTite® 1395 is a single component, fluid applied, VOC-compliant, silicone coating suitable for use in new and recoat applications. It forms a breathable membrane that provides elemental protection for architectural surfaces such as vertical walls, masonry, concrete, metal, single ply membranes and sprayed-in-place urethane foam systems. DuraTite 1395 can be successfully installed in a wide range of ambient temperatures and humidity levels and will cure under cold, ponded water.

DuraTite 1395B is a single component, brushable silicone gel designed to seal fasteners, flashing and drains. It’s excellent adhesion is suitable for direct-to-metal repairs, spray polyurethane foam, smooth built-up, smooth modified, granulated modified and EPDM.



Features and Benefits

  • Fast Drying – Dry to touch within an hour (dependant on temperature and RH)
  • Water Proof – Prevents penetration of water
  • Flexible – For long term impact and crack resistance
  • Durable – High tensile strength
  • Adhesion – Excellent adhesion to most surfaces
  • Environmentally Friendly – Low VOCs

Typical Physical Properties

Tensile Strength (psi): (cps)

ASTM D-2370

300 ± 10

Elongation (%):

ASTM D-2370

195 ± 10

Tear Strength Die C (pli):

ASTM D-624


Permeability (perms) @ 20 mils:

ASTM D-1653


Weathering/UV Resistance (5,000 hrs):


No degradation

Reflectivity (white):

ASTM C-1549

.70 aged 3 yr

Emissivity (white):

ASTM C-1371

.90 aged 3 yr

SRI Value:


110 initial


Processing Properties

Dry to Touch: 1 hour

Cure Time: 2 – 8 hours

Theoretical Coverage: 75 sq ft/gal @ 20 mil

*Dry and cure times are dependent upon mil thickness and temperature and relative humidity at the time of application. High temperatures and low relative humidity will accelerate the drying and curing process, while low temperatures and high relative humidity will slow the process.