QUENCH TANK LINING

Category: Tanks
Customer: CEC International located in Greenville, SC
Project: Line and protect the interior of a quench tank to prevent corrosion
Products: Rhino Extreme™

PROBLEM

CEC International built a 4-feet-long by 4-feet-wide by 12-feet-deep custom carbon steel quench tank for use in their manufacturing process. This water-filled tank is used to cool incinerator residues or hot materials during manufacturing. The tank was initially uncoated, and after a short operational period, it rusted and caused contamination in the manufacturing process.

The manufacturer either needed to completely replace the tank, which would be expensive and time consuming, or find a coating that could protect the interior of the tank.

Preparing and coating the tank was challenging because abrasive blasting of the interior of the tank had to be done indoors where the tank was situated. In addition to that, the applicator had to get in the tank to apply the lining, which made it a confined-space application.

SOLUTION

Southern Industrial Linings, a Rhino Linings® applicator, recommended Rhino Extreme HP 11-50 for the application. Rhino Extreme HP 11-50 is a two-component, rapid-curing elastomeric pure polyurea lining system. It is spray-applied and creates a monolithic, seamless lining that conforms to any shape and size and is excellent for waterproofing.

The applicator abrasive blasted the steel to remove the rust and to create a profile for the coating. Next the surface was cleaned and dried. Then Rhino Extreme HP 11-50 was applied at 100 mills (2.5 mm) using high-pressure, plural component spray equipment to protect the interior of the tank from any further damage.

Rhino Extreme HP 11-50 is an excellent coating for less-than-ideal conditions, like confined spaces and settings where water, humidity or low temperature conditions exist and are tough to eliminate. It installs easily and sets quickly.

BeforeAfter

RESULTS

The entire project took just one day to complete, thereby limiting impact to the plant’s operation. Relining the tank in place was much cheaper than replacing it, and the customer has been happy with the performance of the tank lining. It has held up well to the stresses caused by the manufacturing process.

View Our Other Rhino Linings® Industrial Products

Spray Machines

Construction Equipment

Oil & Gas

0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603